Sandbrooks REEL TO REAL 3D Printing Filament

We put the wax in lost wax casting :)

Diameter; ±0.05mm 1 kg of product on a reel 200 mm diameter by 80 mm wide with a 54 mm bore.

It can be used for "Lost WAX casting" but you will need to experiment to produce a metal object from a printed PLA object. We recommend you buy a hobby pack first and get familiar with the process. Please contact me at 09 278 9816 for a hobby pack. It is $16 for 50 meters (100 grams).

Does not require a heated bed. Our wax filament becomes completely liquid at 270°C. It is a wax-like thermoplastic which can be used for printing a casting mould and it features an excellent dimension stability and has almost no warping effect. At room temperature the printed mould remains stiff and rigid. The filament becomes liquid (with a thin oil viscosity) when heated up to about 270°C thanks to some specially chosen types of oily paraffin. Print at 170°-180°C. .

Features of our Wax filament - dimension stability; - stiff and rigid at room temperature; - Close to no warping; - A heated bed is not necessary Recommendations for printing MOLDLAY filament - Printing temp: between 170°-180°C; - Heated print bed temp: max. 40°C - Moulds must be treated at approx. 270°C in an baking oven.