Listing Detail Tabs

Rostock Max V3.

We have used this the last couple of years to print PLA parts. About a year ago we decided to replace the old 1.75mm extruder head with a 3mm one. At the same time replaced the arms and carriages with the newer models. Since then have had very little success and the hotend is overheating. Unfortunately for us it is uneconomical to spend time fixing it so here's a bargain for someone with 3d printer know-how. Included is the current 3mm hotend, 2 x 1.75mm used hotends, 3 x brand new 1.75mm bare hotends, 3 x new 1.75mm extruder nozzles and a couple of new thermistors(last photo).

Currently, everything on it works fine apart from the hotend/extruder. If you have some experience with 3D printers or are good at fixing stuff you should be able to get it up and running fairly quickly.

Work that needs to be done to get it printing:
- New hotend with correct thermistor and matching firmware settings.
- Attach a longer PTFE filament feeder tube between the motor and the hotend to give extruder the full range and enable it to reach the print bed.

Key Specs:

Max z-resolution = 0.125mm

Avg. print speed = 30 – 60mm/s

Max hotend temperature = 245mm/s (can be increased by installing the appropriate hotend and making changes to the firmware)

Max heated bed temperature = 100 C

Maximum printable x/y area = 280mm (diam.)

Maximum printable square size = 197mm

Maximum printable z-height = 375mm

Link to manufacturers website if you are interested in more details about this printer:

https://www.seemecnc.com/products/rostock-max-v2-desktop-3d
-printer-factory-assembled

Comes with the cables (power and Motherboard coms) as well as the memory card that the print jobs can be loaded onto as well as a mulitude of other bits and pieces.
There were no answered questions or comments placed on this listing.
Your question and answer privileges have been disabled.
You must log in to view questions and answers on this listing. We recommend reading questions before you make any purchases.
You must log in to ask or answer questions posted. We recommend reading questions before you make any purchases. Available only to approved bidders. You must be an authenticated member to ask questions Find out more about becoming authenticated. Your account is in debt Your current account balance is You must credit your account to use this feature.
Firearms licence #
Firearms licence holder name
First name is required
Last name is required
Your current account balance is Please note you will lose your question and answer privileges if your account is in debt for more than 2 weeks. Credit your account.
I confirm that I am over 18 years old.
To prevent your personal details being misused please do not put emails or phone numbers in questions. Failure to comply may result in the suspension of your account. The seller cannot add a Buy Now price once bidding has started.

Shipping options

  • Buyer must pick-up
  • Seller location: Auckland City, Auckland, NZ

Payment options

  • Other options
    NZ bank deposit