Listing Detail Tabs
Item: 3MM PCB MK3 Aluminum (Updated!! 220mm x 220mm x3mm)
Dual Power 12/24V Heatbed Platform for Reprap 3D Printer ( thermistor and fitting stuff is for demo only)
* We're also selling power supply, masking tape and other parts. Feel free to place an order
* An Installation Instruction of MK3 heated bed would be provided with your purchase
* Local stock and could be dispatched immediately.
-Excellent smooth &stability &durability &hardness
-Power: 200W, this updated hotbed can reach 110 degree easily. (normal MK3 hotbed only have 120W, and reach 80Degree Max)
-Size increased to 220mm*220mm. (normal MK3 size is 214*214mm, easily broken during transportation and difficult to handle)
- Dual power supply. Operate at 12V or 24V. You can use thinner wires when operating at 24V.
- 1 layer 35µm (1oz base) copper
Resistance between 1.4 and 1.6 ohm for the 12V
Resistance between 5.0 and 5.4 ohm for the 24V
-100 degree Celsius possible for both 12V and 24V, the power are stable for both 12V and 24V.
-With 15V on the 12V terminals will maintain approx. 115 degree Celsius without regulation
-Running 24V on the 12V terminals will heatup the heatbed to 100 degree in only 2 minutes. The printer controller will regulate the power to the heatbed in order to get the preset temperature.
-120 degree Celsius max. temperature
"NTC" is for installing thermistor, 4,5 is for Welding thermocouple wires
1 piece MK3 updated plate (thermistor and fitting stuff is for demo only)
Local stock and could be dispatched immediately.
1. We are also selling affordable quality 3d printers and filaments and parts. Please view our other listings.
2. GST registered Company. If a GST receipt required please let our helpful customer service team know.