New item
Add this item to Cart for a combined free shipping deal
Click to enlarge photo

Listing Detail Tabs

U-Beaut Sanding Sealer 500ml bottle with flip top lid
Sanding a piece of wood tears at the grain and even after the finest sanding this torn grain is evident almost as soon as a finish is applied. Nine times out of ten the torn grain (nap) will swell and stand up in the finish, giving you the feeling that sand has been thrown on the work.
This sanding sealer is designed to raise that nap of the grain making it stand up and become brittle. It can then be sanded off with fine grit abrasive paper, giving a silky smooth base for you to apply your finish with no fear of the nap raising again.
APPLICATIONApply a damp, even coat using a clean (preferably lint free) rag, to the whole surface of the work. One application is all that is needed. Do not flood the work with the sealer.
Allow to dry. This could take anywhere from 10 minutes to 1 hour or more, depending on weather conditions, timber type and how much you apply.
Once dry sand with one grade of fine abrasive paper. (600 - 800 grit or finer if desired) Sand lightly with the grain. Stop sanding when the nap is removed and the surface feels silky smooth. If the paper clogs immediately with the sealer, leave it to dry a little longer.
This sealer can also be used as a retarder (a sealer that allows dyes and stain to be applied to the surface of most timbers without going blotchy).
USE AS A RETARDERBecause of its nature you can apply a water dye over this sealer (after sanding) and it will soak into the timber evenly without going blotchy.
Apply to end grain timber and sand prior to staining and it will stop the stain from going dark in the grain.
For use with water based and turpentine based stains and dyes. Not recommended for use under or over spirit based dye or stain.
USE AS A BASE FOR WAX FINISH Apply 2 to 3 coats as per instructions allow to dry then apply our Traditional Wax. Allow to dry approx 10 minutes then buff to a bright waxed lustre.
NOTE: Never use steel wool as an abrasive on raw timber. Please click here to ask a question
Your question and answer privileges have been disabled.
You must log in to view questions and answers on this listing. We recommend reading questions before you make any purchases.
You must log in to ask or answer questions posted. We recommend reading questions before you make any purchases. Available only to approved bidders. You must be an authenticated member to ask questions Find out more about becoming authenticated. Your account is in debt Your current account balance is You must credit your account to use this feature.
Firearms licence #
Firearms licence holder name
First name is required
Last name is required
Your current account balance is Please note you will lose your question and answer privileges if your account is in debt for more than 2 weeks. Credit your account.
I confirm that I am over 18 years old.
To prevent your personal details being misused please do not put emails or phone numbers in questions. Failure to comply may result in the suspension of your account. The seller cannot add a Buy Now price once bidding has started.

Shipping options

Buy more than one of this item and only pay for shipping once.
  • anywhere in New Zealand TRacked$7.80
  • Rural delivery$9.80
  • Seller allows pick-ups
  • Seller location: Papakura City, Auckland, NZ

Payment options

  • Other options
    Cash, NZ bank deposit