Introduction:

Brand New!! High Quality! This SPDIF/TosLink Digital Optical Audio Switchers can let the users to connect three digital optical TosLink sources to one optical TosLink (SPDIF) input on your AV amplifier. Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Features:

Three ways of optical fiber signals switch to one sets of SPDIF/TosLink signal receiving device. Audio format support : LPCM2.0/DTS/Dolby-AC3. Support signal retiming. Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m. The input control can through R/M and also can directly press the button. Support last time working state memory when power off. Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine. LED status indication. No loss of quality. Installs in minutes. Need DC5V/500mA power supply.

Specification:

Support audio format: LPCM2.0/DTS/Dolby-AC3 Peak wavelength: 650nm Max baud rate: 16Mbps Output cable distance: Less than and equal to 40m(Use the optical fiber cable loss less the 0.2Db/m) Max working current: 100mA Power adapter format: Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/500mA Operating Temperature range: (0 to +40 Degree) Operating Humidity range: 5 to 90%RH (No Condensation) Dimension (L x W x H): 52x52x23 (mm) SPDIF/Toslink switch weight: 30g

Package Included:

1 x SPDIF TosLink Digital Optical Audio 3 to 1 Switcher 1 x 5V /2.0A Power Adapter 1 x Operation Manual 1 x Remote Controller 1 x IR Extender Line