Package Included

• 1pcs x MAX485 RS485 Transceiver Module

For more RS485 related products we sell, please refer to the following link.

• http://bit.ly/ePartners-rs485

Description:

• This low power transceiver module is based on the Maxim MAX485 IC to allow serial communication over very long cable runs (up 4000 feet / 1200 meters).
• Serial data can be transmitted in both directions (half duplex) at a data rate up to 2.5Mbps.
• The modules operate from a standard 5V power supply and use 5V logic levels allowing them to be interfaced to the hardware serial ports of microcontrollers such as Arduino/PIC etc.
• Direction of communication can be controlled with just one digital pin.
• Multiple modules together for communication between 2 or more devices.
• For even greater distances two modules can be configured as a repeater.

Pinout:

• VCC........5V
• A............Non-inverting Receiver Input and No-ninverting Driver Output.
• B............Inverting Receiver Input and Inverting Driver Output
• GND.......0V
• R0..........Receiver Output (to Rx pin of microcontroller)
• RE..........Receiver Output Enable (Low to enable)
• DE..........Driver Output Enable (high to enable)
• DI...........Driver Input (to Tx pin of microcontroller)

Tutorials & References https://github.com/Maker-World/ePartners/tree/main/NN1003

#NN1003 # RS485

=> ALL PRODUCTS WE ARE SELLING ARE IN STOCK IN NZ <=

If you want to see all the products we are selling, please refer the following link http://www.trademe.co.nz/Members/Listings.aspx?member=6033450

Delivery Note :

• As following our policy, all products will be shipped by a signature required ticket as the default delivery option.
• If you don't want the signature delivery, please leave a comment and specific delivery instruction.

For more information, refer the Q&A section on the listing.

We will provide technical advice for all the products we are selling :)

ePartners