This listing closed and did not sell. The item has been relisted.
- Browse for similar listings in Sensors
- View the relisted item
Other listings you might like
Description
This is a compatible product with Adafruit library. Not official product.
Dimensions: Outer diameter: 85.8mm / 2.6" Inner diameter: 72mm / 2.1" Thickness: 6.7mm / 0.3" Weight: 6.23g May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol
Arduino compatible. Instruction: 1: Download the library from https://github.com/adafruit/Adafruit_NeoPixel. Download the zip version and install this library from Arduino IDE ("Sketch->Include Library->Add 'Zip Library'") 2: Connect your Arduino Board to the LED (VCC\GND\IN) VCC-5V GND-GND IN-D6 pin You need soldering the 2.54mm pins(I will provide if you don't have it) to the LED then use Female to Female cable to connect the pins 3:Open Arduino IDE and choose Sample from the menu "Adafruit NeoPixel" It will work immediately. Then just have fun!
Here's a video about similar product. https://youtu.be/0Kk29P_ICfE
GeekStudio is an electronic DIY parts store. We sell Arduino, Raspberry Pi, Sensors and other 400+ hardware. Visit our website for more details.
Details
Shipping & pick-up options
Destination & description | Price | |
---|---|---|
NZ Wide(Urban) | $5.80 | |
NZ Wide(Rural) | $9.50 | |
For Combine Shipping Only | $1.50 | |
Shipping more than one item | No extra charge | |
Pick-up available from North Shore, Auckland | Free |
Payment Options
Four fortnightly interest-free payments.
Pay Now, Cash, NZ Bank Deposit