SALUD's Silver Cove 5 L -For a Truly Healthy Spa

This is a TM Special Price of $60.00 (Normally $70)

Replace harsh, toxic chemicals with the health and skin-enhancing virtues of Colloidal Silver.

Silver Cove colloidal formula keeps your pool clean without compromising your body.

• Environmentally safe and natural, eliminating the need for Chlorine and Bromine
• Based on a unique formula of colloidal minerals and oxygen to deal with all pathogens and algae
• Colloidal Silver is great for your skin
• Odourless and tasteless
• Saves money and energy as it does not require continual pump usage to keep water circulating
• Can be used in any model spa pool
• Available in 2L and 5L sizes
• Easy, low maintenance usage. No need to test water or balance pH
• Enjoy peace of mind in a healthy pool

Directions: Initial Treatment: Drain, clean and refill spa pool. 2 litres of Silver Cove will be added for every 1000 litres of pool water in the first 3 days:

As water quality varies from place to place we recommend an initial three-day protocol to remove contaminants from your water before using your spa:

On Day 1 Drain, clean and refill spa pool. Add 1L Silver Cove to your spa, followed by 500 ml on Day 2 and 500 ml again on Day 3 while running the pool for a minimum of 6 hours per day) and cleaning the filters each day. Filters need too be rinsed and soaked overnight in degreaser (Poolwise makes an organic degreaser) for the three days and, if possible, put in the sun to dry. The spa pool water should be clear and odourless. (In rare cases, it may be necessary to add further 100 ml increments). Once a week thereafter, add ½ litre (500 ml) per 1000 litres of pool water to be sanitized.

At any sign of decreased water clarity/quality or when spa is under heavy usage, has long exposure to direct sunlight or is contaminated with suntan lotions, sunscreens, etc., increase weekly treatment amount by 100 ml increments until clear.