12 Month Quality Guarantee!! So please bid with confidence!!

IMPORTANT : The heater must be installed Horizontally, and at PUMP'S INLET!!!

MOTOR:

The high flow circulation pump provides up to 15 m3/h flow while operating while drawing only 1.6 amp — that’s equivalent to the power need to illuminate a 250 watt bulb — so you can be sure your spa meets even the most stringent energy regulations while minimizing operating expenses for the owner. This pump is also very compact and easy to install in any configuration,a big plus in production since space is always at a premium.

Application:

It's suitable for hydro massage tube or spa system and circulation or filter of swimming pool system.

Working conditions

Medium temperature: 5-50 degree Max Environmental temp:40 degree Max.working pressure: 0.3MPa

Specification:

Model: WTC50M Power: 0.35HP 250W Voltage: 230VAC Frequency: 50HZ Max. Head: 3.8m Max. Capacity: 240L/min 1.5m cable with 3pin plug Connection fittings are supplied to suit std 40mm ID Pressure pipework or 48mm OD Dimensions: L296mmxW165mmxH195mm

HEATER:

Features:

• Large capacities: 1.5 kW - Fast heating of spas and pools.
• Electric heater made of ABS - Tough and corrosion-resistant.
• Minimum dimensions - Simple installation even when there is little space.
• Equipped with thermostat 0-45°C - Simple setting of required temperature.
• Overheating cutout and flow switch - Dual safety against overheating and a too low water flow.

Specifications:

Model: H15-RS1 Power: 1.5 kW Voltage: 230VAC Frequency: 50/60HZ Current:7 Ampes 1.5m cable with 3pin plug Connection fittings are supplied to suit std 40mm ID Pressure pipework or 48mm OD