Listing Detail Tabs
Easy Connect Steering cable, suits most brands of rotary helm steering, cable only, output ends of Stainless Steel.
Easy connection which does not require tools. Output ends made of stainless steel to minimise corrosion. 7/8" tilt tube mount nut. Suits most Teleflex / Morse rotary steering systems from 1968 to present.
Maximum Travel : 9inch (230 mm)
Minimum bend radius : 8 inch (200mm)
Maximum working load at Tiller end : 5000N (500kg)
Cable Outer Diameter : 15 mm
Spiral inner cable Diameter : 8 mm
How To Measure For Replacement Steering Cable:
Measure dimension D which is the conduit length on the existing cable .
Length of Cable to be ordered : "D" Dimension +22 inch
To order in foot length, divide length by 12 and round up to next whole foot
Example: D=150 inch + 22 inch = 172 inch
Divide by 12 (172/12= 14.33 ft) Round up to 15 ft.
How to measure for new Steering Cable Installation:
Once you have selected the Steering System, it is now required to measure the length of the required Steering Cable. Each boat has a specific requirement of Cable length which depends on the length of the boat and the routing of the cable.
The required Steering Cable length should be measured as below:
Measure the dimensions : A, B, and C in centimetres.
Smart VIP Card prices:
Some of these deals may be member deals but don't worry, if you don't have yours yet, we will start you up with one for free.
Have a question about our Trade Me store, products, delivery times, return terms? We'd love to hear from you. Please refer to http://www.trademe.co.nz/stores/smartmarine/contact-us
Auction integration powered by First Software