Firehorsefx are a New Zealand company making handmade effects pedals.

The backlash is a true bypass - feedback pedal. It can make any pedal true bypass or turn multiple pedals on/off at the same time with the option to add feedback to the mix.

The backlash is a passive pedal – power is required only for the LEDs.

Effects Send/Return - True Bypass Bypass pedals can be used to keep noisy pedals out of your signal chain. They allow you to turn on (or off) several effects at once. Put your effect(s) in the true bypass send/return chain as normal. With the left switch turned on the loop is active and you will hear your normal effect(s).

Feedback The right switch makes the feedback loop active. The feedback of the backlash is designed to send the output signal back to the into the send of the effect loop. This can produce interesting results ranging from oscillating, growling, chirping sounds, to flat out noise, to nothing. It all depends on the pedals you choose to loop.

The key to using feedback is experimentation. Some pedals produce great results while some have little to no effect at all. Try various combinations of pedals. Your pickups and pickup selector position as well as your volume and tone controls also have a great effect on the sound produced.

• Send/Return switch (left) – engages true bypass loop (red LED)
• Feedback switch (right) – engages feedback loop (green LED)
• Volume control
• Feedback control
• power required for LED only - 9v center negative DC

Note: This is not a recording loop pedal. This pedal generates no sound by itself. It takes your other pedals and generates feedback from them.

IN TRADE