Add this item to Cart for a combined free shipping deal
Click to enlarge photo

Listing Detail Tabs

This super strength tour grade hook Velcro is perfect for attaching your effects pedals to your board safely and securely.

** This auction is for a 1ft long x 2 inch (50.8mm) wide length of Tour Grade Velcro HOOK SIDE ONLY which should be enough for easily 7-8 pedals **

LOOP SIDE IS NOT SUPPLIED - I recommend using a good quality loop material (not carpet) to cover your pedal board, that is designed to be used with velcro. I do not the stock the loop side tape as the adhesive used is acrylic so in summer it melts and pulls off the board.

Standard Velcro can easily loose it's grip from your pedalboard and the adhesive does not form a strong enough bond to your effects pedals.
A musician's pedals and pedalboard have a hard life out in New Zealand's live music scene and standard 'fabric store' velcro simply can not stand up to the rigours of the road.

The Tour Grade Velcro we offer is very low profile with extreme gripping power.
The backing is a super strong rubber based pressure sensitive adhesive that, when attached properly, over time will form an extremely strong bond with your effects unit.

Only a small 1-2cm strips at the top and bottom of an average MXR sized pedal is all you need for a secure hold, a little more for bigger heavier units like wahs.

To apply:

1) Clean the base of your pedal with isopropyl alcohol or similar. Make sure it is very clean and there is no cleaner or old glue residue.
2) Measure and cut your Tour Grade Velcro to the size you require. Peel off the backing strip and use a hair dryer to heat up the adhesive a little (this helps with the bonding process).
3)Apply the Velcro to the spotless base of the pedal that you cleaned earlier and press firmly for 30 seconds to 1 minute.

Warning : If you need to remove your pedal from your board after attaching, you will need to use a spatular or similar to gently lift it from the board. The grip is very strong and gets stronger over time, just pulling it off will damage your pedalboard!

Made in the USA Please click here to ask a question
Your question and answer privileges have been disabled.
You must log in to view questions and answers on this listing. We recommend reading questions before you make any purchases.
You must log in to ask or answer questions posted. We recommend reading questions before you make any purchases. Available only to approved bidders. You must be an authenticated member to ask questions Find out more about becoming authenticated. Your account is in debt Your current account balance is You must credit your account to use this feature.
Firearms licence #
Firearms licence holder name
First name is required
Last name is required
.
Your current account balance is Please note you will lose your question and answer privileges if your account is in debt for more than 2 weeks. Credit your account.
I confirm that I am over 18 years old.
To prevent your personal details being misused please do not put emails or phone numbers in questions. Failure to comply may result in the suspension of your account. The seller cannot add a Buy Now price once bidding has started.

Shipping options

  • Anywhere in N.Z includes P&P (No RD address)$4.00
  • Rural within NZ includes P&P$7.00
  • Seller allows pick-ups
  • Seller location: Mt. Maunganui, Bay of Plenty, NZ

Payment options

  • Other options
    Cash, NZ bank deposit