Our team of enthusiasts developed this high-pressure pump to inflate your inflatable stand-up paddle board up to 20 psi.

SUP inflation tips1/ stand on flat and solid ground2/ screw the hose onto the pump3/ connect the hose to the SUP (valve raised)4/ close the cap of the pump body, its double action operation delivers 3.6 L with each up and down stroke5/ inflate the SUP until it reaches its full volume6/ as soon as pumping becomes difficult, open the cap, the pump then operates in single action (1.8 L with each down stroke)7/ inflate to the SUP's recommended pressure. Storage tipsRoll up the hose, do not fold itStore the pump body and hose flat in the SUP bag.Do not stand on the pump or the hose.Clean off any sand, it can damage the seals. Technical dimensionsHeight: 61.5 cmWidth: 27.8 cmDepth: 10 cmHose length: approx. 120 cm70 mm diameter piston for easy high-volume inflation but high-pressure inflation takes a bit more effort.Pump weight: 1.4 kg The double-action high-pressure pump is designed to easily inflate SUPs to pressures of up to 20 PSI.

Ease of use

Two progressive modes of operation: 1/ high volume 2/ high pressure

Power

Robust structure for high pressure. Wide handles.

Parameter measurement

Built-in 3-20 psi pressure gauge.Starts working once the SUP takes shape (3psi)

Robustness

Heavy-duty hose with rotating head to prevent it disconnecting during inflation.

Our team of enthusiasts developed this high-pressure pump to inflate your inflatable stand-up paddle board up to 20 psi.

Estimated Delivery time for

North Island around 2-3 working days

South Island around 4-5 working days