- Windsor Garden Sheds >
- Timber Care
Timber Care
We reamend oiling, Staining or Painting all our wooden products, and we do offer this service.
What is Treated Pine Timber?
Treated Pine is when Radiata Pine is pressure-treated to resist decay, bora and fungi. This process requires the timber to be fully saturated to insure adequate treatment of the whole board. While it will remain in good structural condition for many years, the initial green colour will fade, and the surface will grey over time if not coated.
Harmful effects of Weathering on Wooden Products
Over time, the natural colour of all our wooden outdoor products will naturally weathers to a soft, silver grey when left exposed to the elements. This process takes 6-12 months (depending on your specific climate and how much the product is exposed to the elements). The natural imperfections that are inherent features of natural wood become more pronounced over time, giving a rich, natural and warm appearance.
Expansion and contraction of timbers will occur with changes in humidity and temperature. This can cause timber to split which is natural and not considered a fault. In humid/wet/subtropical climates the timber will likely expand and contract more often, thus causing the grain to rise, split, check or crack. This is a part of the weathering process for outdoor wood products. It will not affect the durability of your product.
To help prolong the life and protect your wooden furniture, regular maintenance and cleaning is recommended.
Care Instructions
1 - Placement: Select a location for your wooden outdoor products (especially unfinished pine) that is away from direct sunlight and heat sources. Unfinished pine is susceptible to cracking and shrinking when exposed to extreme heat or extreme variations of temperature and moisture. It is ideal to place your unfinished pine product where environmental conditions are moderate and stable. Consider sealing the feet or other areas near damp/moist conditions (i.e.: inside of a planter or surfaces against a wall/damp ground).
2 - Cleaning: Regularly clean your wooden outdoor product to avoid decay. Do not use a pressure cleaner / water blaster which can strip out the softer wood fibres and protective oils in the timber.
3 - Protection: Apply a protective wood oil with a clean cloth at least twice a year, it will likely require oiling more often in summer, should the timber appear to be drying out (Consult the documentation provided with your chosen protective coating for more information). Also, choose a lighter colour which will 'reflect' rather than 'absorb' heat from the sun; this is better for your comfort when in use, but more importantly for the product; as it will help resist the natural tendency of timber to crack/bow/cup under heat.
4 - Storage: To prolong the life of your item, store in a cool, dry location when not in use or during periods of extreme weather. Covers do stop harmful UV rays and protect from rain, however they also create a sauna like environment for the products, so a shaded space is always a better option.
Protective Coatings
Breathable protective oil coatings are often regarded as the best approach to protecting wooden products, as the oil prevents moisture from being absorbed through the pores whilst allowing the grain of the wood to breathe naturally.
Wood stains are applied to give the desired appearance rather than to prolong the lifespan of the timber. If the timber seems wet, it is essential to leave the wood to dry before applying a stained finish.
Paint will protect from the elements but requires a fully sealed coating on all surfaces, otherwise the moisture travelling through the timber may cause cupping/bowing and/or it may also crack/blister over time.
Always consult the documentation provided with your chosen protective coating for more information.