OER 47mm Carb

This OER Racing 47mm Side Draught carb is externally float level adjustable. The chokes and jets are to suit a Nissan L6 series 6 cylinder engine of around 3 litre and fitted with triple carbs. No manifolds or gaskets. Uses same jets as Weber 45 DCOE but flows 18% more air than Weber equivalent.

Carb is near new and only done about 1,000kms before an idiot (not me) with a big screwdriver decided to screw the idle adjustment screw in too far which has just started to damage the throat of the carb. However this carb is barely damaged and could probably be used as is. We have removed the ball bearing that would then allow you to redrill the fuel feed hole into the idle adjustment chamber once the carb was repaired. I have been quoted $300 per carb to repair them but thought I would list the carbs first in case someone could do the repair themselves and save some money.

These carbs are over $1,000 each to replace so a good opportunity to save here.

Suitable replacements for Weber DCOE, Dellorto DHLA or Mikuni.

Could suit old school Datsun, Nissan, Toyota, Mazda, Mitsubishi, Ford, BMC, Holden, Vauxhall, Mini, MG, MGB, Fiat, Alfa etc

This carb was one of three but the other two have been sold.