This is a vintage item, a 1992 classic, removed from an old PC, and it comes with its original box and manual.

Detailed information here: http://en.wikipedia.org/wiki/Roland_SCC-1

Note that it is not a PCI card, but ISA, so it would need some kind of ISA to PCI adapter, or there are still some older PCs still around with both ISA and PCI slots.

Sold in strictly as is where is condition, since we don't have an ISA-equipped PC to test it on, but visually appear to be in good condition. Note the photos are not the actual item, but fairly indicative.

General specifications are: "The SCC-1 is 16-part multitimbral with 24-voice polyphony. Individual sounds use one or two voices. The device is compatible with the General MIDI System Level 1 Specification, Roland GS Format and can emulate Roland CM-32P and Roland MT-32 devices. The SCC-1 has 317 or 354 sounds (depending on variant), 9 drum sets and digital reverb/delay and chorus effects [1]. The SCC-1 features a variant of the MPU-401 as the controller for the sound source engine. The SCC-1's MPU is accessed either from the ISA bus using interrupt and I/O address switching or the MIDI In connector. SCC-1's MIDI Out connector can be configured for MIDI Thru operation by software. The sound source output is delivered to both of the audio outputs, 2x RCA (L/R) and the 3.5 mm miniature stereo jack."

Physical Connections and Dimensions

• MIDI In (mini-DIN)
• MIDI Out (mini-DIN)
• Audio Output (RCA jack L,R)
• Headphone Output (stereo 3.5 mm miniature jack for headphones with impedances from 8 to 150 ohms)

Dimensions are 23 (w) x 198 (d) x 126 (h) mm and weight 0.170 kg (without cable)

Microsoft Windows versions up to XP (even Windows NT) have support for the MPU-401 device driver, which can be used with the SCC-1.

Will be shipped in sturdy packaging with good padding.

Happy bidding. Payment within 3 working days, will send within 3 working days of receiving payment. Any questions, just ask.