Brand New Pneumatic Air Cylinder to suit replacement or new applications for air automation or special purpose built machinery and equipment.

Made to ISO standard

Ø40mm Piston with 300mm Stroke Length Supplied with a "CA Single Clevis" and 4 cap screws for the cylinder bottom attachment and either a "FishEye Joint" or a "Y Double Knuckle Joint" for the rod end attachment. Refer to the accessories guide image.

Ø16mm piston shaft with 22mm length of M12x1.25 thread Locknut supplied.

1/4" Threaded inlet ports

Working Supply Pressure = 0.15 - 0.8MPa (22 - 116 PSI)

80 PSI would give 70kg (686N) of push force, 64kg pull 100PSI would give 88kg (863N) of force, 80kg pull

Lubrication will be required as per all normal pneumatic equipment via line oiler.

An economical solution.

Colours of Cylinder ends may be either black or silver but same brand.

Other sizes and specialty pneumatic components upon request.

We also do small Hydraulic Cylinders to order at a keen price of types HTH, HTR, HBU, HASP, HCL

Please ask about other cylinder mountings from the guide. Non stock items may have a 2 week lead time. Refer to the accessories image for guidance.