TS 125 slotting head for direct mounting on milling machine on a "B" type flange (direct bolt up - not tongue type). This head has a 3/4 Hp 3 Ph motor, 125mm stroke and 5 speeds and is able to be rotated in both directions. It has a one shot lubrication system supplying a substantial precision ground ram. The machine has had approximately 10 hours use and is still in new condition. This is a Taiwanese machine. The new cost of this head is $3900 + GST and the mounting plate is over $580 + GST. The slotting head and mounting plate can be sold separately by negotiation