Product Name: CLASS T AMP Model : TP30-MK2 brand Name: Topping Warranty : 12 Month

Description : The new generation from classic TP30 MK2. It is originated from the classic TP30, it is not just a Amplifier, but also intergrated with a USB DAC and also the headphone amp. There's also improvement on the design, more interface and also more convenience control and workmanship.The new TP30 MK2 support ON/OFF via USB.

TP30 MK2 Using Tripath TA2024 Amplifier Chip, TI PCM2704 USB Decoder and TI OPA2134 . Tripath-based for fantastic sound reproduction USB-DAC input for multimedia sound applications also have enhancement in Android support, it can fully support Android Mobile Device 4.1 or above with OTG connection(Only for Native Android system with OTG function)

Specifications : Analog audio input: RCA * 1 (one stereo input) Digital audio input: USB interface Power amplifier output: Banana jacks, BTL output Amp output interface: 3.5 mm headphone jack Decoder sampling: 16bit Decoder sampling frequency: 48KHZ Single weight: about 530g Size (including bulge): 17.7 CM *12.2 CM * 3.8 CM

AMP Parameter : Impedance range:4-8 ohms load Maximum output power of 16.3 W (RL = 4 ohms, THD + N = 10%) 9.7 W (RL = 8 ohms, THD + N = 10%) 0.2 ohms output impedance Minimum distortion: 0.003% Typical distortion: (@ 1 KHZ) 0.012% Frequency response: 20-20 KHZ+- 0.6 dB Input sensitivity:390 MVRMS At the end of s/n < 1 mv Gain: (@ 1 KHZ)28dB

Headphone AMP Parameter : Impedance range:16-300 ohms Maximum power output: 140 mw (RL = 32 ohms, THD + N = 1%) Output voltage swing: 10 VPP Minimum distortion: 0.001% (RL = 32 ohms, Pout = 50 mw) Typical distortion: (@1 KHZ) 0.03% Frequency response flatness: 20-20 KHZ+- 1.2 dB Input sensitivity:1.0 Vrms Noise floor< 10 mu V Gain (@ 1 KHZ) 6.5 dB Package Include : 1 x TP30 MARK II Amplifier 1 x Power Adapter 1 x USB Cable 1 x Menu