Single 99.5% Accurate single use THC / Marijuana Drug Test kit. Same type as Drug Alert tests and not drug test strip type.

You can purchase multiple tests (up to 40) for the same shipping amount. Bulk orders available to wholesalers

Cut off levels to AS/NZ Standard 4308:2008 for immunoassay , THC COOH detection to 50ng/ml.

Methamphetamine test kit also available. Multiple tests can fit in courier bag as per shipping info.

Each test is individually packaged with dropper and sealed and comes with instructions for use.

Overview of Test Procedure (As per printed instruction leaflet)

Bring tests, specimens, and/or controls to room temperature (15-30°C) before use.

1. Remove the test from its sealed pouch, and place it on a clean, level surface. Label the test with patient or control identification. For best results, the assay should be performed within one hour.
2. Using the provided disposable pipette, transfer 3 drops of specimen (approximately 120 µL) to the specimen well (S) of the device and start the timer. Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result area. As the test begins to work, color will migrate across the membrane.
3. Wait for the colored band(s) to appear. The result should be read at 5 minutes. Do not interpret the result after 8 minutes.

POSITIVE: Only one colored band appears, in the control region (C). No apparent colored band appears in the test region (T).

NEGATIVE: Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).