3m or 3.4m SCRIMJET jet boat plans

this auction is for a set of plans and fold drawings for a 3 or 3.4 meter jet boat hull as DXF's/DWG's OR printed full size on heavy paper so you can trace it on your aluminium and cut the parts out with a jigsaw/skillsaw or with a hand held plasma to keep costs down

could easily be built out of mild steel also.

for paper plans in the 3m or 3.4m price is extra $80 above buynow price so $450 ( actualy costs me $140 to have printed)

the 3m hull Requires

2x 1500x3000 of 2 or 2.5mm sides back bonnet and windscreen

1x 1200x2400 of 4, 5 or 6mm for the bottom of the boat

and a length of 20mm tube to weld around the windscreen. i built my first boat out of 2mm and 4mm aluminium

the 3.4 Requires 2x 1500x3000 2.5mm sides/ top etc 1x 1500x3000 5 or 6mm for bottom 1x 1200x2400 2mm for screen

check out this great little build video http://www.youtube.com/watch?v=09Z42-gHr_Q

the 3m designed to be powered by a jetski engine and unit but would fit nicely a subaru boxer engine or v6 if unit was poked out the back. its variable dead rise from 12 to 15 Degrees and it goes very well check this out http://www.youtube.com/watch?v=SD_mAGVY7fw

and the 3.4m is straight 12 Degree deadrise

the 3m boat can be built out of 3 sheets of material if you try to build a boat without plans you will use more as you wont be able to nest the parts as close as you wont know the size/shape of the parts until you have cut them and at least with these plans you know what hull your going to get before you start. if it saves you one sheet of material its half paid for itself it is $400 well spent

free shipping within NZ with buy now

please note the engine cover/ intake duct/engine bearers are not included in the plans or 3 sheets of aluminium as they are different for different configurations

any questions feel free ask