This listing closed and did not sell. The item has been relisted.
- Browse for similar listings in 4 channel
- View the relisted item
ROCKFORD FOSGATE AMP P400-4 PUNCH SERIES
Description
P400-4 The P400-4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the P400-4 is an excellent amplifier choice for virtually any vehicle.
Number of Channels: 4 Rated Power (RMS Continuous Power): 50 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged Total Power (Sum of Rated Power): 400 Watts RMS Dynamic Power (PVC/PowerCube® Measurement): Front Channels 86 Watts x 2 @ 4-Ohms 0° Res 144 Watts x 2 @ 2-Ohms 0° Res
Rear Channels
85 Watts x 2 @ 4-Ohms 0° Res
142 Watts x 2 @ 2-Ohms 0° Res
Bridgeable: Yes
Efficiency (average): 71% @ 4-Ohm
70% @ 2-Ohm
Crossover Controls: Front High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Rear High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP switch position
Signal Input: Low level: 2 RCA pair
Signal Output:
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional PEQ Remote Punch EQ
(overrides built-in Punch EQ2 for rear channels only)
Visual Indicators: Power
Thermal
Protect
Circuit Topology Class: Class-A/B
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Shipping Weight: 8.89 Lbs.
(4.03 Kg.)
Dimensions (HxWxL): 2.25 x 7.625 x 13.02 (in)
5.71 x 19.37 x 33.07 (cm)
Yes we do install.