Note that this auction is for 1 turntable belt, the picture shows the 5 different sizes available.

Here we have high quality turntable belts with 5 various sizes available. Instructions on how to measure your turntable belt and what sizes we have are below. Please email once the auction closes to let us know what size you want.

New replacement turntable belts to fit most brands of belt-drive turntable. There are several ways to measure the size you need:

1. If you have the manual, check the specifications (the easiest way!)
2. Hold a worn belt by the ends without stretching to determine the length of a turntable belt. Measure the inside of the belt's length and multiply by two. Bear in mind that the belt is likely to have stretched so the nearest size smaller is best.
3. Lay a broken belt out straight without stretching it and measure the length. If the belt is in more than one piece, put the pieces together and then measure the length.
4. Wrap a piece of string or thin wire around the turntable and the motor pulley to measure for a seriously damaged or lost belt. Follow the belt's path, mark the string or twist the wire at the correct length, remove the string or wire, stretch it out straight and measure the length.
5. FBM 15.2", 124 x 0.6 x 5mm ,measurements: Circumference length:15.2"/380mm;Width:0.2"/5mm,thickness:0.024"/0.60mm.
6. FBM 15.8", 127 x 0.6 x 5mm, measurements: Circumference length:15.8"/400mm;Width:0.2"/5mm,thickness:0.024"/0.60mm.
7. FBM 21.4", 172 x 0.6 x 5mm, measurements: Circumference length:21.4"/540mm;Width:0.2"/5mm,thickness:0.024"/0.60mm.
8. FBM 23.6, 188 x 0.6 x 5mm, measurements : Circumference length:23.6"/591mm;Width:0.2"/5mm;thickness:0.024"/0.60mm.
9. FBM 25.0" 201 x 0.6 x 5mm, measurements : Circumference length:25.0"/635mm;Width:0.2"/5mm;thickness:0.024"/0.60mm.