Rock Racks are made by Ayers Industries right here in NZ. Our racks are all built from thicker steel and are alot stronger than the cheaper racks on the market. This one has been made super strong to take the weight of 5 bikes.

Number Bikes: 5 Arm Width: 410mm (center to center) Arm Length: 800mm Standover Height: 925mm (approx) Swivel Preventing Bracket: Yes Padding on Prongs: Neoprene

Suitable for 1 7/8" and 50mm towballs Bolts to tow ball with two 12mm cap screws. Allum key tool provided.

The main feature that sets this rack apart from the rest is the shaped prongs. This design creates a cradle like shape and provides great protection from scratching at the front and prevents a bike from falling off the back if a bungee chord or strap breaks. Arms are locked in place by a high tensile 12mm pin. The arms are tight enough to stay in place when folded down but also can be locked in place with the 12mm pin. The racks folding system provides approx 150mm offset so bikes should be well clear of vehicles such as station wagens, vans etc.

The rack has a rings at top and bottom to hook bungee chords etc for securing bikes as well as the swivel preventing bracket to prevent rack twisting on draw bar.

A support strap should be used on any rack carrying 3 or more bikes. The rack itself is easily strong enough but most car tow bars are not so is required to prevent the car tow bar from bending. These are available from Ayers Industries for an extra $20 with Rack.

Ayers Industries are happy to build to your specific requirements.

Please visit http://www.rockracks.co.nz for spec sheet on all racks and information on support strap and Bike Ties.