AMERICAN STANDARD RIFLE

MODEL 1999: MONTANA LONG ACTIONS The first action produced by the Montana Rifle Company was the standard Long Action.The long action will handle any cartridge from the 270 Winchester up to the 375 H & H and 458 Lott length cartridges.

LONG ACTION SPECIFICATIONS Receiver Material & Hardness: 4140 or 415, Rc 42-45 Receiver Ring Outer Diameter: 1.340" (34mm) Receiver Thread: 1.0 - 16 UNF - 2B Thread Depth to Mauser Collar: .750" (19.0mm) Recoil Lug Thickness: .377" (9.6mm) Recoil Lug Width: 1.165" (29.6mm) Recoil Lug Depth: .400" (10.2mm) Guard Screw Spacing: 7.575" (1923mm) Receiver Base Width: 1.165" (29.6mm) Internal Magazine Length: 3.650" (92.6mm) Bolt Material & Hardness: 4140 or 415, Rc 44-48 Bolt Diameter: .698" (17.7mm) Scope Base Spacing - Front: .860" (21.9mm) Scope Base Spacing - Rear: .860" (21.9mm) Scope Base Spaceing - Front to Rear: 4.335" (110mm) (see note below) Note: The spacing of 4.335? is from the rear hole on the front ring to the center hole on the rear bridge. The spacing from the rear hole on the front ring to the rear hole on the rear bridge is 4.907?

The ASR-SS is a stainless steel barreled action in a field grade American Black Walnut stock.

ASR FEATURES

Stock American black walnut stock Sling swivel studs Pachmayr Decelerator recoil pad 13.625" Length of pull

Barrel ASR-SS: Stainless steel Free floated Button rifled Hand lapped

Trigger Adjustable old style m70 trigger 3-3.25 lbs standard pull

Action MRC Model 1999 action ASR-SS: Stainless steel Glass Bedded Control round feed Mauser style ejector 3 position safety

ASR SPECIFICATIONS Caliber: 300 Win Mag Action Size: liong Barrel length: 24 Twist Rate: 10 OAL: 45