24V Monitor with Rear Camera System for Bus / Truck Including Installation

Supplied and installed 24V Monitor with Rear Camera System for Bus / Truck. Price can vary depending on the size of Truck/Bus This affordable large 7" colour high resolution LCD monitor comes with a bracket fitting for mounting on any suitable flat surface using the supplied adhesive pad, or it can be flush mounted into a suitable vehicle panel if available. The display settings are adjustable for maximum picture quality. It is perfect for large vehicles or where a larger display is preferred. 7 high resolution commercial colour LCD monitor Suitable for 12 to 24 volt vehicles (note: if fitting to a 24 volt vehicle the camera must be powered from the LCD monitor the camera CANNOT be connected directly into the vehicle s 24 volt power supply) Wide screen display switchable16:9 or 4:3 Strong unobtrusive pedestal mount (height/swivel/tilt adjustable) Sunshade for the monitor 2x 4-pin inputs for up to two cameras (includes 12 volt power to the cameras) The camera image can be horizontally and/or vertically flipped so the monitor can be mounted four ways upright at the front of the vehicle upright at the back roof mounted at the front or roof mounted at the back of the vehicle Adjustable display settings On screen display (OSD) with remote or push button control Switch between camera views with easy push button on remote or screen If using with a reversing camera when the vehicle is in reverse gear the LCD monitor will automatically switch to display the camera image even if the monitor is not turned on Heavy duty 4-pin connectors - female plugs Will accept both PAL and NTSC format cameras Dimensions: Screen with hood: 175 x 115 x 43mm Height with bracket: approx 115 - 155mm (height/swivel/tilt adjustable) Bracket foot: 120 x 90mm