A neat retro Spindle Bearing with grindstone as per photos. Can not see any makers name. Marks etc & storage dirty etc & all of it needs a good clean etc but basically fine from what I can see. Seems to go around fine & it all seems to work etc, but as it is old etc, is sold as is. Could do with a good clean, wire brushing and oiling etc to make sure everything works smoothly etc.

To me, not an engineer, there does not seem to be any play & if there is, it is minimal. The bolts that wind in appear to be normal RH thread. The main body looks to be steel.

The main body measures approx 195mm odd long & approx 230mm odd long including where the bolt holes are. The threaded bolts are approx 15mm odd wide. The grinding wheel is approx 200mm x 25mm odd. (a coarse grit ??)

Weighs approx 5.3 kg odd, so with packaging it will then take it over 5 kg into the 5 to 10kg Post office charge rate (which doubles it from the under 5 kg charge rate) So, you may want to pick up - see below

Selling as in general condition as per photo (flash can make things brighter than in real life)

Photos are there so check them out.

Great piece for the right person.

SO, this can be PICKUP to save on postage. So PLEASE, only bid or buy if you actually intend to & will complete the trade. So many people buy, & then say they'll pay on pickup - & then do NOT pickup & so NEVER PAY of course. So, to make sure it does get picked up, PAYMENT MUST BE MADE WITHING THREE DAYS, & then picked up within a month when convenient for both of us. Pick up is in Waihi township. We're easy to find in Waihi, just a few roads off the main roads .

As couriers and NZ Post does not cover antiques. collectables, coins etc, they are sent totally AT YOUR RISK. (no replacement, no refund.) We allow pickups, so you can pickup, but if you choose to have them sent by post etc, then it is at your risk as that is your choice. Thank you. 188