560 pieces Adhesive Heat Shrink Electrical Sealing Tube with glue

Shrinkage Ratio:3:1 + adhesive Final max shrink to 1/3rd its original size.

Industrial quality adhesive heat shrink

Colour: Red and Black only

Insulate and strengthen joins against wear, movement, vibration, water and dust. Product cables going through bulkheads.

This heat shrink tube is lined with a hot melt glue so makes a very secure seal, ideal for automotive, boats, machinery and outdoor equipment such as truck, trailers, and machinery of all types.

A superior seal for complete water, gas, dust and corrosion resistance.

For a super strong seal put a short length under a longer length

Ideal for outdoor, marine or industrial use.

Sizes:
See Image.

Size column shows original inside diameter and after heat shrunk diameter - i.e. 2.4mm inside diameter shrinks to .8mm 9.5mm inside diameter shrinks to 3.2mm and so on.

Total: 560 pieces in a plastic box

Operating Temperature:-45C to +125C Minimum Shrinkage Temperature:+70C Full Shrinkage Temperature:+110C-125C

Use heat gun on low setting to shrink.

An ideal kit for electricians, engineers, mechanics and farmers etc. A multitude of uses for sealing electrical joins, protecting wires and cables from abrasion, covering screwdriver shafts, tools handles, sealing rope ends and what have you.

Tip: Use a silicone spray if there is difficulty sliding heat shrink tube over tight fitting cable.

See also our larger diameter 4:1 adhesive heat shrink in lengths.

If there is a delivery delay please check the Tracking Information you were sent.. For any other issues, please contact us by email. PLEASE include any size, colour, delivery instructions or other options in "Delivery Instructions" - NZ owned and based business - all products shipped from NZ.