An affordable Heat Recovery and Ventilation system (HRV) for the DIY person, suitable for a 140m² - 280m² house with a standard ceiling height of 2.4m (Could install dampers for a smaller house ) Two capable people can install a complete system in a standard four bedroom house including ducting in less than a day. ( Auction does not include any ducting or vents only the unit and controller )

• Excellent heat recovery efficiency
• F5 Category filtration for removing Spores, Fine Dust and Pollens
• Fresh, clean, filtered air 24/7 which is great for allergy sufferers
• Reduce condensation
• Continuous balanced system
• Simple control
• Easy to install and maintain
• New Zealand designed and manufactured.

Sized to fit through a standard 600mm Manhole. ( 740mm x 550mm X 320mm )

Aluminium heat exchanger core with a 5 year warranty. 3 Year RTB warranty on everything else including fans.

Standard 200mm ducting spigots.

You everything to install the unit: 1 x NA8017-1 Ventilation Unit including fans 4 x 800mm of chain to hang the unit 4 x Hooks 4 x Adjustable fasteners 1 x Condensate drain fitting 1 x 15m of condensate drain 1 x 3m lead with New Zealand 10A 3pin plug 1 x Fan speed controller

Note: One of the photos shows the inside of the unit without the fans installed.

This is for the DIY person to install, you will require the services of an electrician to fit the wall controller and a 3 pin socket in your ceiling cavity.

Energy saver idea- Add back draft dampers on your bathroom vents, so when a cold wind is blowing it cant blow straight in through the duct !!

Certified to the following standards: AS/NZS 60335.1 :2011 + A1 AS/NZS 60335.2.80 :2004 + A1 AS/NZS CISPR 14.1 :2010 (CISPR 14-1, Edition 5.1, 2009)

This also has the newer RCM mark not a C-TICK to show EMC compliance.