CREALITY K1 220220250mm

Fast, in an Epic Way Crazy 600mm/s*. K1 is 12 times faster than a regular FDM 3D printer. Now, sit tight for the thrill of breathtaking speed. *The 600mm/s speed is achieved at Creality Lab in the Surface Mode with 0.1mm layer height. *The typical speed is 300mm/s. The travel speed is 800mm/s.

Always Print at Full Speed With 20000mm/s² acceleration, K1 ramps up to 600mm/s in only 0.03s, delivering full speed in 90% of the printing time.

Creality Print 4.3 with Speed Genes The latest self-developed slicer Creality Print 4.3 includes rich presets, and streamlines the slicing process into 3 simple stages. Even better, it bolsters high-speed printing with variable line width, arc path, and so on.

Model Cooling by Dual Fans A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too.

Cooling Effect Comparison The model hardens before any stringing and warping could happen. It allows support-free bridges and overhangs.

Print Right out of the Box K1 is assembled and calibrated before shipment and offers a boot-up quick guide. Just start printing the moment your K1 arrives.

Flexible Build Plate Sticky and heat-resistant, it works well with a wide range of filaments. The finely frosted surface makes the model bottom fine and smooth. Bendable for quick print removal.

Hands-free Auto Leveling An array of strain sensors are embedded in the heatbed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don't need to lift a finger or pay any attention.