You're looking at a Anycubic Kobra Plus 3D Printer. This printer was new when I bought it a month or so ago. I have completed 45 prints with it. In that time I've learned a lot about printing and I've learned that I like it enough to upgrade.

Most of the limitations of this printer are due to the firmware. I have upgraded it to a custom firmware that is highly regarded by the Kobra community. It now levels the bed much perfectly, has 0.1mm adjustment for z-offset and can change filament mid print. I used both Cura and PrusaSlicer, with lovely results coming from the latter.

Machine Weight - 11kg Machine Dimensions - 605x560x546mm (HWD) Printing Dimensions - 350x300x300mm (HWD) Nozzle Temperature - 260? Nozzle Size - ø 0.4mm (replaceable, comes with new spare, accepts 0.2-1.0mm) Hotbed Temperature - 100? Printing Speed - 180mm/s Anycubic LeviQ Smart leveling - 25-point precise leveling (note, new firmware gives 49 point levelling) Z-Axis - Double-Threaded Rod Extruder Type - Seperated bowden Control Panel - 4.3" resistive touch-control screen Printing Materials - PLA/ABS/PETG/TPU Power Button - Power-Loss Recovery Data Input - 4Gb MicroSD Card (included)

Comes with the original tools (see photos) a new sampler of PLA, spare nuts/bolts and a new 0.4mm spare nozzle.

You're very welcome to come see it in action, if you're already a keen printer, bring a fast printing sliced file to try on the printer.

Happy to post it but this is entirely at your own cost and risk. I'll box it up as best I can (with the box from another printer).

Pick up is in the Moutere do ask questions if you have any.

Thanks for looking,

Joe.