Please ensure you include a phone number with your order for courier reasons.

Bambu Lab PLA Matte Filament Refill Pack - Lemon Yellow 1kg - 1.75mm - High Speed - Smooth - Soft Texture - 11400

Downloads: Filaments TDS Bambu Lab PLA Matte

• Easy to Print & Beginner Friendly
• Matte Surface Texture
• Biodegradable
• Diameter: 1.75mm +/- 0.03mm Cautions for Use AMS & AMS lite Compatible

Accessory Compatibility

PLA Matte Hex Code Table

RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Printing Tips Drying conditions: 55°C for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

Recommended Printing Settings Drying Settings (Blast Drying Oven) 50 °C,8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 - 230 °C Bed Temperature (with Glue) 35 - 45 °C Printing Speed < 300 mm/s Physical Properties Density 1.31 g/cm³ Vicat Softening Temperature 63 °C Heat Deflection Temperature 58 °C Melting Temperature 163 °C Melt Index 39.4 ± 3.2 g/10 min Mechanical Properties Tensile Strength 30 ± 5 MPa Breaking Elongation Rate 14.8 ± 4.2 % Bending Modulus 2360 ± 250 MPa Bending Strength 53 ± 6 MPa Impact Strength 19.2 ± 3.7 kJ/m²