In good working condition apart from the tuner which I was told was not working when I purchased it but have never tried it. Couple of cosmetic marks here and there. Great sounding amp with big power. I have been using with various speakers including KEF LS50 Meta, Klipsch 620F and Tannoy Monitor Gold with great results. Have used as integrated and as a power amp.
Have now gone to a NAD 2700 Power Amp.

• Power Output:
  • Continuous: 150 watts per channel into 8O (20 Hz–20 kHz, 0.03% THD)
  • Dynamic (IHF, 20 ms burst): 400W (8O), 600W (4O), 800W (2O)
  • Bridged Mono Mode: 480W continuous into 8O; dynamic 1,200W (8O), 1,400W (4O)
• Dynamic Headroom: 5.1 dB at 8O
• Total Harmonic Distortion (THD): <0.03% (20 Hz–20 kHz)
• Frequency Response:
  • Line inputs: 20 Hz–20 kHz, ±0.3 dB
  • Phono (RIAA): 20 Hz–20 kHz, ±0.5 dB
• Signal-to-Noise Ratio:
  • Phono (MM): 76 dB (ref. 5 mV)
  • Phono (MC): 76 dB (ref. 5 mV)
  • Line inputs: 96 dB (A-weighted, ref. 1W)
• Input Sensitivity:
  • Phono (MM): 0.28 mV (ref. 1W)
  • Phono (MC): 0.02 mV (ref. 1W)
  • Line: 15 mV (ref. 1W)
• Input Impedance:
  • Phono (MM/MC): 47 kO / 120 pF
  • Line: 50 kO / 250 pF
• Preamplifier Features:
  • Switchable MM/MC phono stage with low-noise FETs
  • Semi-parametric bass and treble controls (adjustable center frequencies, bypassable)
  • Bass EQ: +8 dB at 35 Hz with infrasonic filter
• Connections:
  • Inputs: Phono (MM/MC), Video Sound, 5 line-level inputs
  • Outputs: Preamp out, 3 outputs, speaker terminals (A/B)
  • Other: AM/FM antenna inputs, phono ground, AC outlets
• Controls: Infrared remote control, Soft Clipping, Mono switch, Speaker Selector, Tone Control Bypass
• Dimensions: 17.1” W x 5.8” H x 15.2” D (435 mm x 146 mm x 385 mm)
• Weight: Approximately 15.5 kg (34 lbs)
• Power Supply: Dual-voltage, signal-tracking Power Envelope circuitry for high dynamic headroom
• Years of Manufacture: 1987–1990