Description
This new cable is for connecting a Quad 33, Naim, B&O etc preamp inputs to more modern RCA style cables. It is short (as extra length usually isn’t required) but on request can be up to 1 mtr.
It has been tested on many vintage systems. Will work on most any vintage amp with 5 pin Din input.
With either male or female RCA connectors (if you don't ask cable ships with Female RCA's).
Input us is typically connecting a turntable to the pre amp phono input. Output use is for example tape or tuner output.
Please state what config you would like at time of order. And brand/Model of system so I can double check for you.
More details here -> https://qandnfix.wixsite.com/q-and-n-fix
Details
Shipping & pick-up options
| Destination & description | Price | |
|---|---|---|
| NZ Wide non rural | $6.90 | |
| NZ Rural | $12.60 | |
Seller does not allow pick-ups
Payment Options
Pay instantly by card, Ping balance or saved bank account.
Cash, NZ Bank Deposit
Questions & Answers (4)
I am looking for a 4 pin DIN to RCA adapter(s). Usage is for Home Theatre, with the RCA connecting to the HT Receiver PRE-OUT port, and the DIN being input to a NAIM Power Amp. Can you help me please? Cheers Pete d*****1 (684 • 1:13 pm, Tue, 13 Mayhi Pete i recon i can help. Can you tell me what model Naim you have? and which input you intend to use on the Naim. Also id guess you need rca male plugs and 1 meter of wore? Let me know nathanhawk77 (520 • Tuesday, 13 May 2025I am wanting to connect a Cambridge Audio HT Amp to a NAIM NAPV175 Can you please give me a price for 1* Male RCA to 4 pin DIN (to drive Centre Channel) 2* Male RCA to 4 pin DIN (to drive Rear) 1m will be fine length wise, or I do have the 4 pin DIN to 4 pin DIN cables that came with the amp. Can you please confirm that the adapter in this auction will allow me to connect a long 10m 2(M) RCA - 2(M) RCA cable to my NAIM 282 Pre-Amp for Front Speaker Duties (via NAP 250). d*****1 (684 • 4:19 pm, Wed, 14 Mayok ill look into this Naim has a habit of changing din plug pinouts over time. So ill be needing to lookup by model and see if i can get the info to be sure it will work. Give me a couple of days nathanhawk77 (520 • Wednesday, 14 May 2025BYTW, tjhe 10m RCA - RCA cable hasn't been put together yet, so I assume it will need to be M - F :-) d*****1 (684 • 4:28 pm, Wed, 14 Mayrca’s my end can be male or female up to you nathanhawk77 (520 • Wednesday, 14 May 2025OK so yes I can make cable that will work. 1x for Centre input and 1x for l/r inputs. Just order 2x of my Quad interconnect RCA-4pin din cables on here (there's an auction for that) . This auction cable should work as input for 282 - if you order again mention model and ill make sure its wired for the job (should it vary). I have Neiam service manuals and having checked these are "special" wiring that only they do! Seller comment Friday, 16 May 2025