FLY SCREEN (INSECT SCREEN) RETRACTABLE TYPE FOR WINDOWS

Keep unwanted insects outside of your home.

• Our products are BEST QUALITY and BEST PRICE!!
• EASY TO INSTALL (DIY)
• MATERIAL: Aluminium frame + Fire proof mesh
• Type A & B is for windows and Type C & D is for entrance doors or large windows (please see our other listings)

1. Type A, A1, B and B1 - will be installed as photo shown. Difference between Type A/A1 and B/B1:

• Type A/A1 have 3 sided which will sit on the window frame.
• Type B/B2 have 4 sided include bottom bar which allow to hold the net.

1. All frames are made to measure (minimum 200 mm ~ maximum 1500 mm for both width and height)
2. Colours - silver and white (black can be ordered by special request – extra 10% cost)

Instruction videos to be uploaded soon…

• HOW TO MEASURE:

• Prior measurement, make sure there are no protruding obstacles around the frame.
• Type A & A1 (3 sided): Measure both width and height, then take out 3~5 mm from width and height to allow some room.
• Type B & B1 (4 sided): Measure width, then allow 3~5 mm gap. Measure height from top of the window frame to the bottom of the window latch, then add 25-30 mm for bottom frame (of the screen) to fit in and allow latch to lock. Please refer photos.

• HOW TO INSTALL:

1. Assemble all frames.
2. Try pulling down and up a few times before installation.
3. Place insect screen on window, then use masking tape to hold it.
4. Use silicon only on the side of the frame. (do not put on the back of the frame)

• Please note:

1. Installation fee: Within 30 km - $30~$50 per screen depending on the condition. (extra $2 per km from Drury)
2. All insect screens are made to measure. If measurements are provided by buyer, the buyer is responsible for any mismeasurements.
3. The auction price is for an insect screen under 600 mm x 600 mm (Price is excluding GST). Anything over will be charged $1+GST per 1 cm from each side width and height.
4. For DIY, freight cost will be at buyers expense.