A classic design by Joe Bridi, his 60 size trainer was adopted by RCM as the RCM Trainer 60 and later the Great Planes 60 Trainer.

The RCM Trainer 60 has everything you're looking for in a trainer. It's a simple build, going together a bit like a classic "Stik" design, a thick wing design which is stable and will slow down for landing, but being symmetrical it will still loop, roll and spin.

Designed for 4 channels rudder, elevator, ailerons and throttle, the RCM Trainer 60 will fly well on any engine size from a 40 to a 60 two stroke.

The original plan only includes details of the right-hand wing construction, so I will provide a second mirror-image print of the wing plan giving you both a left and right hand wing to build over.

Wingspan: 65" / 1651mm Number of channels: 4 Recommended engine size: 40 - 60 two stroke, 54 four stroke or electric equivalent Number of sheets: 2 Includes original construction article

--- Plan Printing Service ---

I am pleased to be able to offer a quality plan printing service for scratch builders, for plans up to 36" / 915mm wide. I have a selection of classic plans of popular model aircraft available for you to browse and print. All of the plans are in the Public Domain, so the only cost is for the printing service.

If there is a particular plan you are looking for there are tens of thousands of free plans available for download at Outerzone http://www.outerzone.co.uk or Aerofred http://www.aerofred.com

Check those two archives and we can arrange for you to email me a plan PDF for printing. The cost for most 36" plan sets is $13.90 for one sheet, and $12 for each additional sheet per plan.

Plans are delivered folded down into an A3 size courier packet. Please note that I cannot deliver to rural addresses.

The images shown are indicative of the completed model built from this plan. This auction is for a print of the plan and any relevant construction article.