CTEK BATTERY CHARGER CTEK MXS 5.0 CTEK MXS5.0

Superstart batteries limited East Tamaki / Mt Albert

The MXS 5.0 uses a unique and patented technology which charges batteries in an optimal way. There are three different programs and functions which can be used to ensure that your battery lasts longer.

Charging and maintenance charging The MXS 5.0 charges your battery using a unique 8-stage process which supplies the right voltage to the battery at the right point in time in the charging cycle. The charger also automatically switches to maintenance charging for batteries left charging for more than ten days.

Reconditioning program The program rectifies acid stratification through charging the battery at a higher voltage. The acid and water are therefore mixed through a controlled process. It's recommend that you recondition your battery once a year to ensure performance is maintained.

Charging in the cold and AGM batteries A higher charge voltage is required at low temperatures. The program therefore increases the charging voltage to 14.7 volts instead of 14.4. This program is also excellent for AGM batteries.

Specifications Volt 12V Rated Voltage AC 220-240VAC, 50-60Hz Charging voltage SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V Min battery voltage 2.0V Charging current 5A max Current, mains 0.6A rms (at full charging current) Back current drain <1Ah/month Ripple <4% Ambient temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger type 8 step, fully automatic charging cycle Battery types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity 1.2-110Ah up to 160Ah for maintenance Dimensions 168 x 65 x 38mm (L x W x H) Insulation class IP65 Weight 0.6kg Temperature compensation Built in charge voltage compensation according to ambient temperature