This listing closed and did not sell. The item has been relisted.
- Browse for similar listings in Carburation & induction
- View the relisted item
Silicone Hose 90 Degree Bend Reducer (Assortment of sizes)
Description
1 x Silicon Hose 90 Degree Bend Reducer (Assortment of sizes)
This auction is for one connection only, trader has option of picking any of the 15 Sizes available.
Sizes are (Inside Diameters)
30mm < 45mm or (1.3/16 Inch< 1.3/4" Inch) - $36 each 38mm < 45mm or (1.1/2" < 1.3/4" inch) - $36 each 45mm < 51mm or (1.3/4" < 2" Inch) - $36 each 51mm < 60mm or (2" < 2.3/8" Inch) - $36 each 51mm < 64mm or (2" < 2.1/2" Inch) - $36 each 51mm < 70mm or (2" < 2.3/4" Inch) - $36 each 51mm < 76mm or (2" < 3" Inch) - $36 each 57mm < 64mm or (2.1/4" < 2.1/2" Inch) - $36 each 60mm < 64mm or (2.3/8" < 2.1/2" Inch) - $36 each 64mm < 70mm or (2.1/2" < 2.3/4" Inch) - $36 each 64mm < 76mm or (2.1/2" < 3" Inch) - $36 each 70mm < 76mm or (2.3/4" < 3" Inch) - $36 each 70mm < 80mm or (2.3/4" < 3.5/32" inch - $36 each 76mm < 90mm or (3" < 3.1/2" Inch) - $36 each 76mm < 102mm or (3" < 4" Inch) - $36 each (SOLD OUT)
Wall thinkness ranges for 3-5 ply deep depending on the Size of the joiner and are about 76mm long
Suitable for Air Intake, Turbo / Intercooler Setup's & Water Systems.
Standards:
- Colour : Blue
- Size Tolerance: 1.5mm
- Pressure: 0.3 to 0.9Mpa
- Temerature Range: -40 to 220oC
- Polyester reinforced: 3-5 ply ( Depending on size )
Additional Silicon 90 Bend Reducer can be bought for an addition $36 each upon purchase of this auction and this will help save on freight.( Limited stock ask when purchase )
** Please Note these are REDUCERS, they go from one size to a differant size around a 90 Degree bend. If you are after a Joiner or Reducer please see our other listings **
PLEASE ALSO CHECK OUT MY OTHER RADIATORS & VEHICLE COOLING ACCESSORIES