Rule-Mate Fully Automated Bilge Pump 2000GPH - Part Number - NS2000RA - Highly intelligent circuit board in a single housing

Rule-Mate Fully Automated Bilge Pump 2000GPH

Features

The Rule-Mate 2000 GPH pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing. The pump is activated when the water reaches 2-1/2in and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".

Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessel's batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to 'check' for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2in and shutting off at 5/8in.

Specifications

• Operation- Automatic.
• Gallons Per Minute- 33.3.
• Gallons Per Hour- 2000.
• 2000 GPH (7570 LPH) at 0' (27.2V).
• All-in-one pump and switch.
• Extra-long life heavy-duty motor.
• 1in NPS discharge with 1in AND 1 1/8in screw-on ports.

THIS ITEM IS SHIPPED DIRECTLY FROM OUR LOCAL SUPPLIERS

NZ Code NS2000RA-24