Cutek Restore is the product of choice for cleaning decks and outdoor furniture. Cutek Restore is a concentrated water soluble timber cleaner.

Cutek Restore can remove:

Water marks and stains

Sap and resin stains

Deep fungal stains

Green stain from CCA treated (tanalised) timber

Oil, grease, carbon stains and many other chemical stains

Cutek Restore restores and enhances the surface character of any species of timber. Results can be quite spectacular. Dead fibres and stains are removed, restoring the natural timber colour. Cutek Extreme can then be applied to maintain and protect the renewed appearance.

Application: Wet your timber prior to applying CUTEK® Restore. Apply CUTEK® Restore liberally to wetted timber with a brush, roller, lambswool applicator or broom.

Let CUTEK® RESTORE do the work by leaving it on the surface for 1 hour to 24 hours depending on the severity of staining or discolouration. It may be necessary to scrub stubborn stains moderately with a stiff fibre brush.

Removal: Once CUTEK® Restore has cleaned the timber, it must be water rinsed off thoroughly. For best results, power rinse with a high-pressure washer set to approximately 50 bar (750 p.s.i.) with a fan jet pattern. REMOVAL WITH A GARDEN HOSE IS NOT SUFFICIENT.

CAUTION must be used when cleaning soft timber. Reduce the pressure or adjust distance from the substrate to avoid damaging the sapwood. It is important to adjust your cleaning process to avoid damage to the wood fibre.

The longer that CUTEK® Restore is left on the substrate, the greater the rinse time required. Clean from the highest point and work down methodically using long even strokes in the direction of the grain.