We default for Goat!if need for cow,eamil us!

Battery Model:5200 mAh Large Capacity Upgraded Rechargeable Battery,it can work fully 3 hours with 5hours charge.Also you can adjust the working frequency of the motor through the knob, to reduce the uncomfortable feeling of cows or goats at high intensity of milk sucking.Pulsation cycle is about 40~46 times per minute, can saves at least one-half of the labor and time. The milk container is equipped with a check valve that prevents the milk flow into the pump when the milk is full.

Toubleshooting: 1.No suction , First,check whether the silicone ring in the milk container lid is shifted ,and whether the lid buckle is tighted well.Second,check if PC quick-plug connector is inserted in place.Third,check whether the milk suction heads and the udders are in good contact. 2.There is suction but no milk flows out,First,check if the suction is too large. Operating steps:

1. Tighten the lid of the milk container;
2. Connect the milk tubes well. Connect the tubes according to same numbers (such as 1-1;2-2;3-3;4-4.....) The unmarked tube correspond to the unmarked places.
3. Insert the power adapter port into the host machine hole, then the installation is completed.
4. Power- on and turn on the switch of host machine. Open to maximum speed
5. Before suck milk, should wash breasts with warm water, keep breast moist and do not need dry it. Cover the lids of milk buckets tightly, then hold two liners at the same time, put it on each side nipples. After putting, press the milk liners up to prevent it from leaking, after a while, it can suck the teat and the suction force will become stronger and stronger. When sucking milk, massage the breast with hands, which can speed up the milk production. After the inhalation is smooth, it will get faster and faster