Tig torch water-cooled WP-18

Buy a standard package to fit your machine / cooler or we can customise a torch to fit your equipment. If you don't have a cooler we have two options depending your budget.

Just select from the drop-down menu (above and to the right)

WP-18 water-cooled torches are able to weld at 350 Amps while being light and flexible because the power cables are smaller due to the water cooling. Water-cooled torches connect to a closed-loop cooling water system, but can also be connected to a simple pump and bucket. Our water coolers are fitted with M12 x1.0mm water connections but can be supplied with adapters to fit your torch.

We stock two types or torch the standard industrial design and the ergonomically styled Progrip / Parweld series with a soft leather cover near the handle. The Progrip torch has optional switches that can be easily changed to give current control at the handle or different styles of push button on/off switch. (see our 'tig remote control plug' listing) Our foot remotes can be customised to fit most machines and have an 8m long cable.

Specifications Head type: WP-18 or WP-18F (flexible head) Current: 350 Amp @ 60% Duty Cycle Cooling: Water Cooled Length: 4 - 16m

Water Cooler Supply: single phase, 230 volt AC, 10 amp plug, 350W Connections: inlet / outlet M12 x 1.0mm male Model: WR-82 Size: 640 x 320 x 325mm Water flow 9 l/min Water capacity: 10.8 L

Foot Pedal remote controller Material: Solid construction of painted pressed steel Size: 220L x 140W x 90H Cable length: 8m The top and bottom are covered with anti-slip grit.

We also sell consumables for the torches we sell, see our 'Tig Consumables' listing

Also see our "Mig Consumables" as well as our "Plasma Consumables" listing