This is our listing for Mig welding consumables. You can buy as much of the product below as you require in any combination all for the one low freight charge. Total the cost of the products below you require and adjust the buy now amount until your total equals the order cost. (Round down to the nearest $)

Torch / Gun Consumables (see the attached photo / chart)

Gun Size 14 Tip holder ($4.95) M5 Tip all sizes (also used in small spool guns) ($0.65) Nozzle 8mm thread ($6.95)

Gun Size 15 {1/2} spring / holder ($2.99) The thread between the tip holder and the swan neck is either left hand (LH) or right hand (RH) ..tighten clockwise = RH, tighten anti-clockwise is LH {3} tip M6 250A ($0.65) {4} nozzle 12x53mm ($3.95) 16x53mm ($3.95)

Gun Size 24 {5} diffuser ($5.95) {6} holder ($3.95) {7} tip M6 250A ($0.65) 380A ($0.99) 380A Ali ($0.99) {8} nozzle 12.5x64mm ($6.95) 17x64mm ($6.95)

Gun Size 25 {9} spring ($5.95) {10} holder ($8.75) {7} tip M6 250A ($0.65) 380A ($0.99) 380A Ali ($0.99) {11} nozzle 15x57mm ($7.75)

Gun Size 36 {12} diffuser ($1.99) {13 holder M6 ($4.99) M8 ($4.99) {14/7} Tip 380A M6 ($0.99) 450A M8 ($1.29) 380A Ali M6 ($0.99) 450A Ali M8 ($1.29) {15} nozzle 16x84mm ($8.99)

Gun size 501 water cooled {18} Nozzle 9.95 {16} Diffuser 4.50 {14} M8 tips 1.29 {17} Tip holder 7.50

Tregaskiss style Retaining head $22.95 T-lock tips $1.49 Nozzles $25.90 Shock washer 22.10

Bernard Style T series Centrefire tips $1.89 D1 diffuser Nozzle copper, 1/4 recess, 5/8 bore N-5814C style 25.95

LINERS fits all Euro connector guns up to 6m long (just trim length to suit your gun) Insulated red 0.6 - 0.9mm Insulated blue 0.9 - 1.2mm Teflon 0.8 - 1.2mm Teflon 1.2 - 2.0mm

Other liners Tregaskiss Tough gun style 4.5m 1.2 - 1.6mm ($19.95) Tregaskiss Tough gun style 4.5m 0.9 - 1.2mm ($ 19.95) Lincoln for SP170 mig (Magnum 100L torch) 0.6 - 0.9mm liner 15 feet long - ($35) Lincoln for SP170 mig (Magnum 100L torch) 0.9 - 1.2mm liner 15 feet long - ($35)