PLEASE NOTE:

*NW-35 Mic Stand Max load: 35oz / 1KG. This Stand is NOT Suitable for Blue Yeti USB Mic. *Table Mounting Clamp for desktop up to 1.7"/4.5cm thick. PLEASE CHECK the thickness of your table BEFORE ordering. *Shock Mount Diameter: 1.6"-1.8"/43mm-46mm. PLEASE VERIFY your mic size BEFORE ORDERING. *Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally.

NOTE:

1.The Condenser Mic only works with the device that could provide enough power(Voltage Required:5V) for it. When connected with desktop computer, the Mic could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.

2.If your device could not provide enough power(when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.

3.The mic can not be used with mobile phone and tablet computer. NOTE: It cannot work with Mac.

4.If you want better sound effect, a sound card should be used.

5.When recording, please put the mic away from the amplifier to prevent recording noise due to amplifier.

Description:

(1)White NW-700 Condenser Mic Gold-sputtered diaphragm for accurate sound reproduction. Low noise, wide dynamic range, high sensitivity output. Material: Metal

(1)White NW-35 Mic Stand Max load: 35oz / 1KG Double-braced arms equipped with super-strong spring. Folding type, convenient to carry. Extend up to 31.5"/80cm. Material: Steel

(1)Black Pop Filter

(1)Black Metal Shock Mount

(1)Black Ball-type Foam Cap

(1)Black Table Mounting Clamp

(1)Black 3.5mm Male to XLR Female Cable

Length: 8.2ft/2.5m

The delivery time is around 15 - 25 working days after your purchase .