Switch an audio source from Speaker Set A to Speaker Set B or Combine Both (A+B Speakers ), without overloading the trasistor output stages. This can be useful if you have speakers wired to another area in your home but have one audio source.

Features 1 input to 2 outputs Select Speaker Set A, B or A+B (please check for impedance compatibility with your amplifier when using A+B) Left (+/-) & Right (+/-) screw terminals for amplifier input Select output to speakers set 1, speaker set 2, or both sets at the same time 10 watts per channel 1 Speaker on, 2 Speakers on OR All Speakers on Designed with non-shorting selector switch so you can select between two speaker systems without overloading the output stages

Specifications Audio power handling: 10 watts/ channel continues music power Frequency response: 0.1 dB, from 20 Hz to 20kHz Note: Impedance restriction for total speakers is 4 ohm. Therefore, you should ensure your system or amplifier will accept a 4 ohm load at the speaker output. Please find impedance chart from user manual at download section PRO1001

Happy Trading! Thanks for Visiting Bourne Electronics