This grill matches the Cabinet Toe Grill and is perfect for mounting into cabinet toe kicks or doors and cabinets where a narrow grill is desired.

Features

• Easily and economically add passive cooling to a cabinet
• For use in toe kicks or anywhere where a narrow grill is needed
• Includes painted screws

Home Theater Recommended Practice: Equipment cooling and ventilation Recommendations: Ambient Room Conditions

• Temperature: 20 - 23 C Equipment Conditions
• Operating Temperature: 29 C
• Fresh Air Inlet to Rack/Cabinet: 24 C Note: 99.6% of all power (electricity) going into a rack is converted to heat Note: for approximately every 5 C above 29 C, reliability of equipment drops 50%

General Specifications Dimensions - Grill Face: 6.7cm x 44.5cm Dimensions - Depth: ~13mm Mounting Hole: 5cm x 39cm Mounting Type: Insert Mount (Grill body extends into the cabinet) Material: ABS Plastic - Smooth Colors: Black or White

Installation

1. Determine the location for the grill ensuring that there will not be any obstructions inside the cabinet.
2. Cut a 5cm x 39cm opening in the cabinet - using a jig saw for 'accessible' cuts or a saws-all may work best for tight working conditions. This opening size allows for a little 'play'.
3. Using the grill as a template, place it in the cut out and mark the 4 screw holes and pre-drill those with a small drill bit (smaller than the screws).
4. Screw grill to the cabinet.

RRP $44.33incl gst