The SwiftDry Flex mount system - enable Height Adjustment on your fold-down clothesline + get the added benefit of extending the reach of your lines to keep them away from the fence, or clear the garden.

Kitset Includes;

• 2x Flex Mount Brackets in Black Colour (one for each side of the clothesline)
• 4x 8mm stainless steel bolts to attach your clothesline brackets to the Flex Mount Brackets
• The SwiftDry Flex Mount system is fully Pre-assembled and ready to install, which takes no more than 20 minutes depending on the situation. For example, whether it is installed into Masonry/Brick, timber, or steel.

Not included: 1x Folding Frame Clothesline to mount to this system

NOTE: Not compatible with the Austral Add A Line 35, Standard 28, or the SkyLine 33 due to their large 1.5m frame depth allowing for too much leverage on the flex mount arms.

With an adjustment range of 40cm, you can position your clothesline frame 15cm above the fence (or above top of Flex Mount wall bracket) and adjust it all the way down to as low as 30cm below the top of the fence (or top of Flex Mount wall bracket)

For example, with a 1.9m high fence, you can have your clothes lines anywhere from 1.6m off the ground up to 2 meters off the ground. If you wish to install it lower the range could be as low as 1.2m - 1.6m off the ground