MPPT Solar Charge Controller 60A 12/24V/36V/48V ML-Series

MPPT solar charge controllers are programmed with a Maximum Power Point Tracking algorithm that allows the solar charge controller to track/calculate the maximum power output of a solar panel or solar array at any given time to a 99% rate of accuracy. Due to the accuracy of the Maximum Power Point Tracking algorithm and the built in DC-DC converter, our MPPT solar charge controllers have a conversion efficiency of up to 98% for converting the solar energy into usable energy for charging the battery or supplying solar power to loads when the battery is full. The self-consumed power for the solar charge controller has been designed to be as low as 0.7W-1.2W resulting in minimal impact or power drain on your system.

Example of how the DC-DC converter works for a 12V Battery: Solar panel - 36Volts x 9Amps =324W DC-DC Conversion Battery - 12Volts x 27Amps = 324W The built in DC-DC Power Converter steps down the voltage from the solar panel to match the battery voltage, while transforming the surplus voltage into current. This method is up to 40% more efficient compared with the conventional P.W.M(Pulse Width Modulation).

Compatible with all battery types, the battery charging parameters can also be customized A temperature sensor is supplied with each unit for monitoring battery temperature to help increase battery life and for extra safety. The Bluetooth module that is included with the 60A MPPT Model allows you to check historic data or make adjustments using an App on your phone.

Specifications:

System Voltage: 12/24V/36V/48V Maximum Solar Open Circuit Voltage (V.O.C) : 150VDC Maximum Solar Voltage (V.M.P) : 120VDC Solar Input power: 12V Battery Bank: 800 Watts 24V Battery Bank: 1600 Watts 36V Battery Bank: 2400 Watts 48V Battery Bank: 3200 Watts Rated Charge current: 60Amps Rated Controller Load Output Current: 20Amps Operating Temperature: -35 - +45 Degrees Celsius Protection Degree: IP32 Size: 285mm x 205mm x 93mm Weight: 3.1kgs Warranty: 3 Years