used Rimu timber - a mixture of window jambs , facings , arcatraves and a sill - with very good timber to be cut down to , only a few nails in the ends and edges , i pulled most out and properly through the back to preserve a good face for finishing - SIZES starting from smallest to biggest - 65 mm long x 20 mm thick = 1 x 1550 mm lng and 2 x 900 long x 20 mm thick - 90 mm x 20 mm = 3 x 2080 / 1 x 1450 / 1 x 1300 / 2 x 800 - 110 to 130 wide x 20 but mainly 120 wide average = 1 x 2400 long with the checkout in it at the 700 and then 1650 mark / 5 x 2000 long / 3 x 1700 / 1 x 1600 / 2 x 1280 plus a few smaller pieces - 170 mm wide x 20 mm thick 2 x 1870 long - window jambs 140 mm wide and 90 mm wide to the rebate , these are 45 mm thick and rebate down to 32 mm thick - 1 x 2500 long / 5 x 1800 / 1 x 1500 / 3 x 1400 - one big sill piece ( see photos ) good chunk of rimu the before the dry rot - 1500 mm long x 50 mm thick and its good wood up to approx 100 mm wide before rot - Arcatraves 60 mm x 11 mm thick 2 x 2000 mm long / 1 x 1300 - 50 x 10 Arcs 2 x 2000 long / 2 x 1900 / 1 x 1800 long - i have now added more timber - so therecare more rimu jambs 130 to 140 wide x 30 to 20 ml at the rebate , sizes - 1 x 2450 long / 1 x 2250 long / 2 x 2000 mm long / 1 x 1440 long and 3 x 1250 long - another 120 mm wide x 18 m thick 1 x 1200 mm long and a chunky sill 45 mm thick and 1080 mm ling so now theres approx 80 metres in reuseable rimu here , work that out to buy new and this is a good deal ! prefer cash on pick up from te henga road - henderson / waitakere Auckland area