Description
African Teak hardwood I’m currently away on leave till the 16th May. Would be easier to sort freight/pick up after this. 50x25 x 950 and 630mm Rough sawn lengths Designed for parquet flooring at 300x45x18 size but can be used for furniture or glue laminated for larger sections, anything you can dream up. Its very old, not sure of date but early to mid 1900s In the pile shown there are over 950 pieces at 630 long There is a second pile around 280 pieces of 950 long with a few machined there are more 630s available perhaps 500+ pieces. At least 50m2 after being machined to a 45mm width The colour is exquisite and you wont be able to source this sort of timber at this price again. will upload some additional photos of some of the items made form this timber
Details
Shipping & pick-up options
| Destination & description | Price | |
|---|---|---|
| To be arranged | N/A | |
| Pick-up available from Dunedin, Otago | Free | |
Payment Options
Pay instantly by card, Ping balance or saved bank account.
Cash, NZ Bank Deposit
Questions & Answers (1)
Are you saying the maximum machined width finish grade would be 45mm for the lot? Or what percentage of the lot could be finish grade machined to a larger dimension and what would that dimension be? r***********z (67 • 11:31 pm, Fri, 2 MayThe bulk, approx 98% are rough sawn to 50mm x 25mm with some being a touch over, standard machining would take it down to around the 45mm x 18mm. There are a few of the longer pieces that have already been machined. I would have to check what size they went to whether it was 45 or 40. mjf (767 • Friday, 2 May 2025